Polyurea Coatings

RamShield PX-100

Name: RamGuard Rapid 1K
Brand: Ram Urethanes

Two-Component, 100% Solids, Zero VOC, Fast-Set Aromatic Pure Polyurea Spray Elastomer

Overview

Ram Shield PX-100 is a two-component, 100% solids, zero VOC, 1:1, fast-set aromatic pure polyurea spray elastomer system specifically designed for chemical and high heat resistance. Ram Shield PX-100 provides an exceptionally tough polymer that gives outstanding physical performance against tear and impact in severe applications. Ram Shield PX-100 provides a thick film barrier with excellent chemical and abrasion resistance.

Key Features

Abrasion Resistance

Engineered for severe wear environments, PX-100 delivers a thick film barrier that withstands continuous abrasion from equipment, aggregate, and process materials.

Chemical Resistance

Formulated for fertilizer plants, food processing, and industrial manufacturing where exposure to aggressive chemicals demands a reliable, impermeable barrier.

Fast Set

Gel time of 5–10 seconds (gun) enables rapid return to service, minimizing downtime in active production and processing facilities.

High Heat Resistance

Maintains coating integrity under elevated temperature conditions, making it suitable for high-heat industrial and manufacturing environments.

High Film Build

Applied at any desired thickness — theoretical coverage of 1 gallon per 1,600 sq ft at 1 mil — allowing precise build-up for demanding containment applications.

Low Temperature Application

Can be applied in cold conditions, extending the usable season and reducing project scheduling constraints in northern climates.

Typical Applications

Fertilizer plants
Food processing plants
Industrial manufacturing
Mining and agriculture
Primary containment
Secondary containment
Wastewater

Technical Data Sheet

Loading document…

Technical Specs

Mix Ratio (by volume): 1A : 1B
Gel Time (gun): 5–10 seconds
Gel Time (recoat): 0–6 hours
Hardness (ASTM D2240): 70 ± 5 Shore D
Flex Modulus (ASTM D790): 350,000 psi
Impact (ASTM D2794): 300 in-lbs
Tensile Strength (ASTM D624): 3,000 ± 200 psi
Elongation (ASTM D412): 240 ± 20%
Density Side-A: 9.7 ± 0.2 lbs/gal
Density Side-B: 8.5 ± 0.2 lbs/gal
VOC Content: Zero VOC

Request a Quote View All Products

Back to Product

Polyurea Coatings

RamShield SPX-200

Two-Component, 100% Solids, Zero VOC, Fast-Set Aromatic Pure Polyurea Spray Elastomer

Overview

Ram Shield SPX-200 is a two-component, 100% solids, zero VOC, 1:1, fast-set aromatic pure polyurea spray elastomer system designed for high impact and abrasion environment industrial applications. Ram Shield SPX-200 provides an exceptionally tough polymer that gives outstanding physical performance over concrete, steel, non-ferrous alloys, and many composites. Ram Shield SPX-200 may be applied at any desired thickness horizontally, vertically or overhead.

Key Features

Abrasion Resistance

Engineered for high-impact industrial environments, SPX-200 delivers outstanding physical performance against continuous abrasion from equipment, aggregate, and process materials.

Chemical Resistance

Provides a reliable barrier against chemical exposure in bridges, building infrastructures, and industrial manufacturing applications.

Fast Set

Gel time of 5–10 seconds enables rapid return to service, minimizing downtime across active industrial and marine operations.

Impact Resistance

Exceeds 350 in-lbs impact resistance, protecting railcars, mining equipment, tanks, and reservoirs from heavy mechanical loads.

High Film Build

Applied at any desired thickness horizontally, vertically, or overhead — theoretical coverage of 1 gallon per 1,600 sq ft at 1 mil.

Low Temperature Application

Can be applied in cold conditions, extending the usable season and reducing scheduling constraints on outdoor and marine projects.

Typical Applications

Bridges
Building infrastructures
Industrial manufacturing
Marine applications
Mining equipment
Pipelines
Railcars
Tanks and reservoirs
Waterproofing

Technical Data Sheet

Loading document…

Technical Specs

Mix Ratio (by volume): 1A : 1B
Gel Time (gun): 5–10 seconds
Recoat Time: 0–6 hours
Hardness (ASTM D2240): 55 ± 5 Shore D
Impact (ASTM D2794): > 350 in-lbs
Elongation (ASTM D412): 375 ± 20%
Tear Strength (ASTM D624): 34 mg loss
Density Side-A: 9.3 ± 0.2 lbs/gal
Density Side-B: 8.3 ± 0.2 lbs/gal
VOC Content: Zero VOC

Request a Quote View All Products

Back to Product

Polyurea Coatings

RamShield CPS-300

Two-Component, 100% Solids, Zero VOC, Fast-Set Aromatic Silicone Polyurea Spray Elastomer

Overview

Ram Shield CPS-300 is a two-component, 100% solids, zero VOC, 1:1, fast-set aromatic silicone polyurea spray elastomer system. Its silicone-modified structure gives superior chemical and heat resistance compared to traditional polyurea systems. Although aromatic, Ram Shield CPS-300 exhibits reduced oxidation when exposed to UV/sunlight, greatly reducing gloss loss. It is resistant to algae and marine growth with excellent chemical and heat resistance.

Key Features

Fast Set

Gel time of 5–7 seconds enables rapid return to service, minimizing downtime across aerospace, industrial, and containment applications.

Good Gloss Retention

Silicone-modified aromatic chemistry greatly reduces UV oxidation and gloss loss compared to standard aromatic polyureas, maintaining appearance over time.

High Chemical Resistance

Superior chemical resistance for food processing plants, primary and secondary containment, and tank linings exposed to aggressive process chemicals.

High Elongation

325 ± 20% elongation accommodates substrate movement and thermal cycling without cracking or delamination.

High Film Build

Applied at any desired thickness horizontally, vertically, or overhead — theoretical coverage of 1 gallon per 1,600 sq ft at 1 mil.

High Heat Resistance

Silicone-modified structure maintains coating integrity under elevated temperature conditions in industrial manufacturing and mining environments.

Low Temperature Application

Can be applied in cold conditions, extending the usable season and reducing scheduling constraints on outdoor and industrial projects.

Typical Applications

Aerospace / aviation
Food processing plants
Industrial manufacturing
Mining and agriculture
Primary containment
Secondary containment
Tank linings

Technical Data Sheet

Loading document…

Technical Specs

Mix Ratio (by volume): 1A : 1B
Gel Time (gun): 5–7 seconds
Recoat Time: 0–6 hours
Hardness (ASTM D2240): 70 ± 5 Shore D
Flex Modulus (ASTM D790): 350,000 psi
Elongation (ASTM D412): 325 ± 20%
Tear Strength (ASTM D624): 30 mg loss
MVT (ASTM E96): 0.24 perms
Density Side-A: 9.24 ± 0.2 lbs/gal
Density Side-B: 8.45 ± 0.2 lbs/gal
VOC Content: Zero VOC

Request a Quote View All Products

Back to Product

Urethane Floor Systems

RamFloor UF-300

Heavy-duty urethane floor coating

Overview

Two-component aliphatic urethane topcoat offering excellent UV stability, abrasion resistance, and color retention. UF-300 is the preferred finish coat for industrial and commercial floors where aesthetics and long-term durability are both required.

Key Features

UV Stable

Aliphatic chemistry resists yellowing and chalking under direct sunlight, maintaining color and gloss for years.

Abrasion Resistant

Withstands heavy forklift traffic, steel-wheeled carts, and continuous foot traffic without wearing through.

VOC Compliant

Meets strict VOC regulations for use in occupied facilities and environmentally sensitive areas.

Easy Maintenance

Smooth, non-porous surface resists staining and cleans easily with standard industrial cleaners.

Typical Applications

Manufacturing plant floors
Warehouse and distribution centers
Food and beverage facilities
Aircraft hangars
Commercial showrooms

Technical Specs

Components: 2-component
Chemistry: Aliphatic urethane
Dry Time (light traffic): 4–6 hours
Full Cure: 7 days
Coverage: 250–300 sq ft/gal
VOC: < 100 g/L

Request a Quote View All Products

Back to Product

Urethane Floor Systems

RamFloor PC-400

Single-Component Water-Borne Polycarbonate Polyurethane Coating

Overview

Ram Floor PC-400 is a single-component water-borne polycarbonate polyurethane thin film protective coating with quick return to service. It has excellent chemical resistance, abrasion resistance, and hot tire pickup resistance. This non-hazardous, no-odor material may be pigmented to any color or used as an optically clear clearcoat/topcoat on concrete, metal, composites, ABS, wood, and existing coatings.

Key Features

Does Not Support Bacteria or Fungus Growth

Hygienic, seamless surface ideal for food service, clean rooms, and institutional environments.

Excellent UV Stability

Maintains appearance and performance both indoors and outdoors without yellowing or chalking.

Fast Cure / No Odor

Tack-free in 20–30 minutes at 72°F. Water-borne formula produces no hazardous vapors during application.

Superior Chemical & Abrasion Resistance

Taber abrasion loss <0.5 mg (CS17, 1 kg, 1K cycles). Resists hot tire pickup and aggressive cleaning chemicals.

Unlimited Custom Colors

Available in gloss or matte finish. Clear and Black standard; custom colors available upon request.

Zero VOC

0 lb/gal VOC — compliant with the most stringent air quality regulations and safe for occupied spaces.

Typical Applications

Aircraft hangars & clean rooms
Commercial & industrial facilities
Commercial & residential garages
Food & service areas
Institutional & recreational facilities
Polyurea topcoat & warehouse floors
Retail, theaters, theming, wood, steel

Technical Data Sheet

Loading document…

Technical Specs

Chemistry: Single-component water-borne polycarbonate polyurethane
VOC: 0 lb/gal
Solids by Weight / Volume: Clear: 38 ± 2% | Pigmented: 45 ± 2%
Viscosity at 80°F: 30–100 cps
Tack Free Dry Time (72°F, 65% RH): 20–30 minutes
Return to Service — Foot Traffic: 24 hours
Return to Service — Vehicle Traffic: 3 to 4 days
Tensile Strength (ASTM D412): 2,790 ± 200 psi
Elongation (ASTM D412): 104 ± 20%
Pencil Hardness (ASTM D3363): 2H
Adhesion to Concrete (ASTM D7234): >300 psi
Application Temperature: 45–100°F (7.2–37.8°C)

Request a Quote View All Products

Back to Product

Urethane Floor Systems

RamFloor DH-500

Two-Component, Zero-VOC, 100% Solids Polyurea Coating

Overview

Ram Floor DH-500 is a 1:1 ratio, zero-VOC, 100% solids, environmentally friendly coating system designed to protect and preserve concrete and asphalt surfaces under demanding conditions. The system offers outstanding UV stability, excellent chemical resistance, and superior abrasion protection, making it ideal for industrial and vehicular traffic environments. Ram Floor DH-500 can be mixed and applied by hand and allows for full return to service within 4 hours.

Key Features

Excellent Chemical Resistance

Formulated to withstand aggressive chemicals, fuels, and industrial fluids in demanding service environments.

Zero VOC / 100% Solids

Environmentally friendly formula with no solvents — zero VOC and 100% solids content for maximum film build.

High Build — Up to 60 Mils

Single-coat application up to 60 mils WFT fills surface voids and delivers a robust, long-lasting barrier.

Fast Return to Service

Tack-free in 35–45 minutes; accepts foot traffic in 4 hours and full service in 24 hours.

No Special Equipment Required

User-friendly 1A:1B mix ratio applied by notched squeegee, roller, brush, or low-pressure 2K apparatus.

UV & Color Stability

Maintains appearance and performance in both interior and exterior applications without yellowing or chalking.

Typical Applications

Concrete and asphalt surfaces
Parking structures
Pedestrian walkways & sports stadiums
Wastewater tanks & containment
Decking & flooring
Manholes & wastewater transmission lines
University & campus flooring

Technical Data Sheet

Loading document…

Technical Specs

Chemistry: Two-component 100% solids polyurea
Mix Ratio: 1A:1B by volume
VOC: Zero
Solids Content: 100%
Pot Life (72°F / 22°C, 50% RH): 15–20 min
Gel Time (>60°F): 20–25 min
Tack Free Dry Time (>60°F): 35–45 min
Return to Service — Foot Traffic: 4 hours
Return to Service — Full Service: 24 hours
Hardness (ASTM D2240): 80 Shore D
Tensile Strength (ASTM D412): 4,000 ± 200 psi
Elongation (ASTM D412): 7 ± 1%
Taber Abrasion (ASTM D4060): 45 mg loss
Application Temperature: 40–120°F (4–49°C)

Request a Quote View All Products

Back to Product

Protective Coatings

RamGuard WBE 2.0

Two-component water-based epoxy primer

Overview

Ram Guard WBE 2.0 is a clear or pigmented, two-component, fast-drying, water-based aliphatic-epoxy formulation with excellent chemical and UV resistance. It delivers superior adhesion to concrete, metals, asphalt and many other surfaces with no odor or VOCs, making it ideal for interior building applications. Available with 50% nano-size glass filler, anti-static and anti-corrosive additives.

Key Features

Zero VOC / No Odor

Water-based formulation contains no VOCs, allowing safe use in occupied interior spaces without respiratory hazard.

Excellent Chemical & UV Resistance

Aliphatic-epoxy chemistry provides outstanding resistance to chemicals and UV degradation for long-term performance.

Long Pot Life

6–8 hour pot life at 72°F gives applicators ample working time for large or complex projects.

Anti-Static & Glass-Filled Options

Available with 50% nano-size glass filler for a matte non-skid finish, plus anti-static and anti-corrosive additive packages.

Typical Applications

Concrete and asphalt surfaces
Industrial flooring and manufacturing
Interior and exterior applications
Secondary containment
Steel substrates

Technical Data Sheet

Loading document…

Technical Specs

Type: Two-component water-based epoxy
Mix Ratio: 1H:1R by volume
Solids Content: 50 ± 2%
Tensile Strength: 9,000 ± 200 psi (ASTM D624)
Elongation: 18 ± 2% (ASTM D412)
Pot Life (72°F / 50% RH): 6–8 hours
Tack Free Dry Time (>60°F): 25–30 min
Full Cure: 7 days
Coverage Rate: 100 ft² at 16 mil WFT
Application Temperature: 50–100°F (10–37.8°C)
Taber Abrasion (ASTM D4060): 75 mg loss
VOC: Zero

Request a Quote View All Products

Back to Product

Protective Coatings

RamGuard DTM-600

Single-component water-borne DTM primer

Overview

Ram Guard DTM-600 is a low-odor, water-borne, high-solid styrene acrylic emulsion developed for high-build exterior and interior decorative concrete coatings and direct-to-metal (DTM) coatings for construction and heavy machinery. It offers excellent corrosion resistance, strong adhesion to steel, high film build, and high gloss potential with low VOC chemistry.

Key Features

Direct-to-Metal (DTM)

Formulated for direct application to steel substrates after blast cleaning — no separate primer required for most steel applications.

Excellent Corrosion Resistance

High-solid styrene acrylic chemistry delivers strong corrosion, water, and humidity resistance for demanding industrial environments.

High Film Build

Achieves 200 ft² coverage at 8 mil WFT (4 mil DFT) per gallon, reducing the number of coats needed for full protection.

Single Component / Low VOC

Ready-to-use single-component formula with low VOC and low odor — no mixing required, safe for interior and exterior use.

Typical Applications

DTM steel applications
Construction equipment
Heavy machinery
High-build decorative concrete coatings
Exterior and interior industrial coatings

Technical Data Sheet

Loading document…

Technical Specs

Type: Single-component water-borne styrene acrylic
Application: Direct-to-Metal (DTM) primer
Solids by Weight: 50 ± 1%
Viscosity (80°F): 500 cps
Density: ~8.8–9.0 lbs/gal
Coverage Rate: 200 ft² at 8 mil WFT
Application Temperature: >50°F (10°C)
Recoat Window: Within 24 hours (controlled environment)
VOC: Low VOC
Surface Prep (Steel): SSPC-SP 10 Near White Blast, 3–6 mil profile

Request a Quote View All Products

Back to Product

Joint Seal

RamSeal FL-100

Two-component 100% solids zero VOC polyurea joint sealant

Overview

RamSeal FL-100 is a two-component, 100% solids, zero VOC, elastomeric polyurea sealing system designed to act as a crack filler for use with small to large cracks in concrete, masonry, and other cementitious substrates. It provides exceptional adhesion, fast cure times, high chemical resistance, and remains thermally stable from -26°F to 250°F. It may be used under traditional floor coatings or any Ram Urethanes top-coating material.

Key Features

Zero VOC / 100% Solids

Fully solids polyurea formulation with zero VOC — safe for use in occupied spaces including food-processing plants, cold storage, and interior warehouse environments.

Fast Return to Service

Gel time of 3–5 minutes and return to service in just 15–20 minutes under normal conditions, minimizing downtime in high-traffic industrial and commercial floors.

High Elongation & Flexibility

500% ±50% elongation (ASTM D412) and 1/8" mandrel flexibility (ASTM D1737) allow the sealant to accommodate joint movement and thermal cycling without cracking.

Chemical & Abrasion Resistance

Highly chemical resistant and abrasion resistant with Shore A 85 ±5 hardness — suitable for heavy traffic warehouse floors, refrigeration floors, and chemical spill-prone environments.

Typical Applications

Concrete crack filling and expansion joints
Heavy traffic warehouse and industrial floors
Refrigeration and cold storage floors
Airports, bridges, and parking decks
Food-processing plants and naval decks
Walkways, balconies, and pothole road repair

Technical Data Sheet

Loading document…

Technical Specs

Type: Two-component 100% solids polyurea
Mix Ratio: 1A:1B by volume
Gel Time: 3–5 min
Tack Free Time: 8–10 min
Return to Service: 15–20 min
Surface Temperature: 20–150°F (-7–66°C)
Shore A Hardness (ASTM D2240): 85 ±5
Tensile Strength (ASTM D412): 1,300 ±200 psi
Elongation (ASTM D412): 500% ±50%
Tear Strength (ASTM D624): 350 pli
Viscosity Side-A @ 73.4°F: 1,000 ±200 cps
Viscosity Side-B @ 73.4°F: 1,150 ±200 cps

Request a Quote View All Products

Back to Product

Joint Seal

Ramseal FLX-200

Two-component 100% solids zero VOC polyurea — high elongation crack filler

Overview

Ramseal FLX-200 is a two-component, 100% solids, zero VOC, elastomeric polyurea sealing system designed to act as a crack filler for use with small to large cracks in concrete, masonry, and other cementitious substrates. It provides exceptional adhesion characteristics and fast cure times. Highly chemical resistant, insensitive to water, abrasion resistant, and thermally stable from -20°F to 250°F (-29°C to 125°C). It may be used under traditional floor coatings or any Ram Urethanes top-coating materials. Compared with Ramseal FL-100, FLX-200 offers higher elongation (>700%) for greater movement accommodation.

Key Features

Ultra-High Elongation (700% ±50%)

700% ±50% elongation (ASTM D412) — significantly higher than standard polyurea sealants — allows FLX-200 to accommodate large joint movement, thermal cycling, and dynamic crack activity without failure.

Zero VOC / 100% Solids

Fully solids polyurea formulation with zero VOC — safe for use in occupied spaces including food-processing plants, cold storage facilities, and interior warehouse environments.

Fast Return to Service

Gel time of 3–5 minutes and return to service in 20–30 minutes under normal conditions, minimizing downtime in high-traffic industrial and commercial floors.

Broad Thermal & Chemical Resistance

Thermally stable from -20°F to 250°F and highly chemical resistant — suitable for refrigeration floors, food-processing plants, chemical spill-prone environments, and under ceramic tile floors.

Typical Applications

Expansion joints and concrete crack filling
Heavy traffic warehouse and industrial floors
Refrigeration and cold storage floors
Airports, bridges, and parking decks
Food-processing plants and naval decks
Walkways, balconies, and pothole road repair

Technical Data Sheet

Loading document…

Technical Specs

Type: Two-component 100% solids polyurea
Ratio by Volume: 1A:1B
Gel Time: 3–5 min
Tack Free Time: 10–12 min
Return to Service: 20–30 min
Surface Temperature: 20–150°F (-7–66°C)
Shore A Hardness (ASTM D2240): 80 ±5
Tensile Strength (ASTM D412): 1,200 ±200 psi
Elongation (ASTM D412): 700 ±50%
Tear Strength (ASTM D624): 200 pli
Flexibility Mandrel (ASTM D1737): 1/8" Pass
Viscosity Side-A @ 73.4°F: 1,200 ±200 cps
Viscosity Side-B @ 73.4°F: 1,100 ±200 cps
Density Side-A: 9.0 ±0.2 lbs/gal
Density Side-B: 8.8 ±0.2 lbs/gal

Request a Quote View All Products

Back to Product

Joint Seal

Ramseal 70 DS

Two-component 100% solids zero VOC casting resin — 70 Shore D

Overview

Ramseal 70 DS is a 100% solids, zero VOC, two-component, 70 Shore D hardness casting polymer designed to produce dimensionally stable, high-impact, and durable fills. It provides excellent impact resistance, working time, abrasion resistance, and strength. Highly chemical resistant and insensitive to water, it remains thermally stable from -20°F to 150°F (-29°C to 65°C). Ramseal 70 DS is designed for horizontal pour application or use in molds, joints, or voids.

Key Features

70 Shore D Hardness

High Shore D 70 ±5 hardness (ASTM D2240) delivers exceptional rigidity and impact resistance — ideal for structural void fills, spall repairs, and joint fills subject to heavy wheeled traffic and point loads.

High Tensile Strength

5,000 ±500 psi tensile strength (ASTM D412) provides superior structural integrity for concrete repair, casting applications, and load-bearing joint fills in commercial and industrial floors.

Zero VOC / 100% Solids

Fully solids formulation with zero VOC — safe for use in occupied spaces including food-processing plants, cold storage facilities, and interior commercial environments.

Chemical & Abrasion Resistance

Highly chemical resistant and abrasion resistant with low temperature stability down to -20°F — suitable for refrigeration floors, food-processing plants, and chemically aggressive industrial environments.

Typical Applications

Concrete spall repair and void filling
Expansion joints and crack filling
Open molds and castings
Commercial and industrial floor repair
Food-processing plants and cold storage facilities
Walkways, balconies, and horizontal pour applications

Technical Data Sheet

Loading document…

Technical Specs

Type: Two-component 100% solids casting resin
Mix Ratio: 1A:1B by volume
Gel Time: 20–25 min
Tack Free Time: 45–60 min
Service Temperature: -20 to 150°F (-29 to 65°C)
Shore D Hardness (ASTM D2240): 70 ±5
Tensile Strength (ASTM D412): 5,000 ±500 psi
Elongation (ASTM D412): 25 ±10%
Tear Strength (ASTM D624): 300 ±50 pli
Viscosity Side-A: 1,500 ±200 cps
Viscosity Side-B: 740 ±100 cps
Shelf Life: 12 months

Request a Quote View All Products

Back to Product

SPF Foams

RamFoam EZFloat 2.0

Two-Component, Closed-Cell Spray Polyurethane Foam for Marine Flotation

Overview

RamFoam EZFloat 2.0 LD is a two-component, closed-cell spray polyurethane foam (SPF) system. It is designed for use as a flotation fill in marine applications such as boats, docks, and personal watercraft. EZFloat 2.0 LD provides buoyancy, structural support, and resistance to water absorption in demanding marine environments.

Key Features

Marine Flotation

Specifically designed as a flotation fill for boats, docks, and personal watercraft, providing reliable buoyancy in demanding marine environments.

Closed-Cell Structure

Closed-cell chemistry delivers greater than 95% closed cell content, minimizing water absorption and maintaining long-term buoyancy performance.

Low Water Absorption

Water absorption by volume of only 0.49% (ASTM D2842), ensuring the foam retains its flotation properties even after prolonged water exposure.

Structural Support

Compressive strength of 40 psi parallel and 28 psi perpendicular (ASTM D1621), with shear strength of 37 psi, providing structural reinforcement within marine hulls and cavities.

Fast Cream and Rise

Cream time of 35–40 seconds and rise time of 200–250 seconds allow controlled pour-in-place application with predictable expansion in enclosed cavities.

UL 94 HBF Flame Classification

Rated UL 94 HBF per QAI Test Report No. TJ5347, meeting flame spread requirements for marine and enclosed-space applications.

Typical Applications

Boat flotation fill
Dock and marina flotation
Personal watercraft flotation
Marine hull cavity fill
Buoyancy and structural support in marine applications

Technical Data Sheet

Loading document…

Technical Specs

Cream Time: 35–40 seconds
Rise Time: 200–250 seconds
Demold Time: 5–20 minutes
Flash Point (ASTM D1621): >200°F (93°C)
Compressive Strength, Parallel (ASTM D1621): 40 psi (0.275 MPa)
Compressive Strength, Perpendicular (ASTM D1621): 28 psi (0.193 MPa)
Shear Strength: 37 psi (0.255 MPa)
Closed Cell Content (ASTM D6226): >95%
Water Absorption by Volume (ASTM D2842): 0.49%
K-Factor Initial (ASTM C518): 0.164 Btu·in/ft²·°F·h
UL 94 Flame Class (QAI Test Report No. TJ5347): HBF
Side-A Viscosity @ 77°F (25°C): 150–250 cps
Side-A Specific Gravity @ 77°F (25°C): 1.24
Side-A Appearance: Liquid
Side-B Viscosity @ 77°F (25°C): 400–500 cps
Side-B Specific Gravity @ 77°F (25°C): 1.18
Side-B Appearance: Viscous liquid

Request a Quote View All Products